Cupressus Torulosa (Himalayan cypress)


Add to Favourite

Use the following links to jump to the associated section in the main data.

Scientific Name
Cupressus torulosa

Trade Name
Himalayan cypress

Family Name
Cupressaceae

Common Names
Cypress, Deodar, Devidiyar, Dhupi, Dotial, Galla, Gulla, Gulrai, Himalayan cypress, Kallain, Leauri, Leori, Leuri, Raisal, Raisalla, Rasula, Sarai, Sarru, Surah-vyu, Surai, Surin

Regions of Distribution
Oceania and S.E. Asia

Countries of Distribution  [VIEW MAP]
India, Nepal, Vietnam

Common Uses
Beams, Building construction, Cabin construction, Chairs, Chests, Clogs, Concealed parts (Furniture), Concrete formwork, Construction, Desks, Dining-room furniture, Dowell pins, Dowells, Drawer sides, Drawing boards, Factory construction, Fine furniture, Floor lamps, Form work, Foundation posts, Framing, Furniture , Furniture components, Furniture squares or stock, Hatracks, Heavy construction, Joists, Kitchen cabinets, Light construction, Living-room suites, Millwork, Office furniture, Picture frames, Planks, Porch columns, Radio – stereo – TV cabinets, Rough construction, Rustic furniture, Stools, Structural work, Studs

Environmental Profile

Abundant/Secure
Rare in parts of its natural range (population is at risk)
Data source is World Conservation Monitoring Center

Distribution Overview
W. Himalaya at 1800-300 m on limestone substrates; China: W Sichuan, in arid areas at 1500-2500 m (Vidakovic 1991); and Vietnam, where restricted to a narrow area of the Central Region and the North at elevations of 800-1200 m in Lang Son and Tuyen Quang. Also planted in Kon Tum and Lam Dong. It is a shade intolerant species, thriving in tropical and subtropical rainforests, where it prefers calcareous substrates. It occurs naturally as a dominant in mixed stands with Markhamia stipulata and Burretiodendron hsienmu, sometimes forming pure stands on mountain slopes and summits. It is rather slow-growing, and natural regeneration is very limited. Also in India at the outer ranges of the Himalayas, from Chamba to Nepal.

Heartwood Color

Red
Green/grey
Yellow
Pink
Brown
Grey
Orange
Light brown

Darker streaks

Sapwood Color

Red
Yellow
White to yellow

Grain

Even
Straight

 

Straight

Texture

Medium
Coarse
Fine
Fine to medium

Luster

Medium

Natural Durability

Susceptible to insect attack
Non-durable
Non-resistant to powder post beetles
Non-resistant to termites
Non-resistant to marine borers
Perishable
Resistant to powder post beetles
Moderately durable
Resistant to marine borers
Non-resistant to termites
Highly resistant to decay fungi, and subterranean termites

Odor

No specific smell or taste

Silica Content

Siliceous

Drying Defects

Checking

Ease of Drying

Moderately Difficult to Difficult
Fairly Easy
Rapidly
Slowly
Dries well under good controlled conditions

Kiln Drying Rate

Naturally dries slowly
Naturally dries quickly

Tree Size

Trunk diameter is 100-150 cm
Bark width is 5-10 mm
Tree height is 30-40 m
Bole length is 20-30 m
Sapwood width is 10-15 cm
Tree height is 20-30 m
Bole length is 10-20 m
Bark width is 10-15 mm

The tree is described as a large evergreen

Certified Source

Certified Source

Comments
Moderately strong tough and hard

Blunting Effect

High to severe

Boring

Fair to good results
Fairly easy to very easy

Carving

Fair to Good Results
Fairly Easy to Very Easy

Cutting Resistance

Easy to saw
Fairly Difficult to Very Difficult to saw

Gluing

Fairly Easy to Very Easy
Fairly Difficult to Very Difficult
Very Good to Excellent Results

Mortising

Fairly Difficult to Very Difficult
Fairly Easy to Very Easy
Fair to Good Results

Moulding

Fairly Difficult to Very Difficult
Poor to Very Poor Results
Fairly Easy to Very Easy
Fair to Good Results

Movement in Service

Fair to Good Stability – Medium Movement
Excellent Stability – Small Movement

Nailing

Fairly Easy to Very Easy
Fair to Good Results
Very Good to Excellent Results

Planing

Fairly Difficult to Very Difficult
Poor to Very Poor Results
Fairly Easy to Very Easy
Fair to Good Results

Resistance to Impregnation

Resistant heartwood
Resistant sapwood

Response to Hand Tools

Easy to Work
Fairly Difficult to Difficult to Work
Responds Readily

Routing & Recessing

Fair to Good Results
Fairly Easy to Very Easy

Screwing

Fairly Easy to Very Easy
Fair to Good Results
Very Good to Excellent Results

Turning

Fair to Good Results
Fairly Easy to Very Easy

Veneering Qualities

Suitable for peeling
Suitable for slicing
Veneers moderately easy
Difficult to veneer
Veneers easily

Polishing

Fair to Good Results
Fairly Easy to Very Easy
Easy

Strength Properties
The weight is medium.

Numerical Data

Item Green Dry English
Specific Gravity 0.4 0.47
Weight 31 30 lbs/ft3
Item Green Dry Metric
Specific Gravity 0.4 0.47

References
Limaye, V. D. 1954. Grouping of Indian Timbers and Their Properties, Uses, and Suitability. Indian Forest Records, New Series. Timber Mechanics, Vol. 1, No. 2. Forest Research Institute, Dehra Dun, India.

Limaye, V. D. and B. R. Sen. 1956. Weights and Specific Gravities of Indian Woods. Indian Forest Records, New Series. Timber Mechanics, Vol. 1, No. 4. Manager of Publications, Delhi.

Troup, R.S. 1909. Indian Woods and Their Uses. The Indian Forest Memoirs, Economic Products Series, Volume 1, No. 1. Superintendent, Government Printing, Calcutta, India.

WCMC. 1992. Conservation Status Listing – Trees and Timbers of the World. World Conservation Monitoring Center – Plants Programme, Cambridge, CB3 ODL, United Kingdom