Agathis Moorei (Kauri)


Add to Favourite

Use the following links to jump to the associated section in the main data.

Scientific Name
Agathis moorei

Trade Name
Kauri

Family Name
Araucariaceae

Common Names
Agathis, Almaciga, Bindang, Dakua makadre, Damar minyak, Kauri, Kauri pine, Menghilan, Red kaori, Tolong, White kaori

Regions of Distribution
Oceania and S.E. Asia

Countries of Distribution  [VIEW MAP]
New Caledonia, Papua New Guinea

Common Uses
Bobbins, Building materials, Core Stock, Decorative plywood, Decorative veneer, Domestic flooring, Excelsior, Figured veneer, Flooring, Interior construction, Interior trim, Joinery, Millwork, Moldings, Paneling , Parquet flooring, Picker sticks, Plain veneer, Plywood, Shade rollers, Shuttles, Specialty items, Spindles, Spools, Stencil & chisel blocks, Structural plywood, Sub-flooring, Sucker rods, Trimming, Umbrella handles , Utility plywood, Veneer, Wainscotting

Environmental Profile

Rare
Endangered
The future survival of this species is at risk
Likely rare in many parts of its natural habitat
Data source is World Conservation Monitoring Center

Scattered populations are found throughout the northern half of New Caledonia island, mostly on non-ultramafic substrates. Substantial declines have occurred through overexploitation of the timber in recent years.

Distribution Overview
Grows primarily in New Caledonia. It is a species of tropical, lowland, moist, open forest occurring on shales, sandstones, and schists up to 1000m.

Heartwood Color

Brown
Yellow
Red
Highly variable
Pink
Orange
Yellow to golden-yellow to orange
Pale red to pink
Dark brown
Color varies considerably
Brown

It is sometimes mottled or streaked

Sapwood Color

Brown
Yellow
Color not distinct from heartwood

Grain

Even
Crossed
Irregular
Figure
Spiral
Straight
Mottle

 

Straight
Spiral grain occasionally
Mottled or streaked figure sometimes
Irregular or uneven grain occasionally

Texture

Fine
Fine

Luster

High
Medium
Often lustrous

Natural Durability

Durable

Medium to high resistance

Odor

No specific smell or taste

Resin Content

Contains resin
Contains dammar (used in making of paint, varnish, linoleum, and turpentine)

Kiln Schedules

10 – D5S (4/4) U

Drying Defects
Seasons well without degrade

Ease of Drying

Reconditioning Treatement
Rapidly
Fairly Easy
Little degrade
Little or no degrade
Easy
Dries at a fairly rapid rate

Tree Size

Trunk diameter is 150-200 cm

The trees are capable of reaching a height of 200 feet (60 m)

Boring

Fair to good results
Fairly easy to very easy
Fair results

Carving

Fairly Difficult to Very Difficult
Fairly difficult to carve

Cutting Resistance

Easy to saw
Easy to saw

Gluing

Very Good to Excellent Results
Very good gluing properties

Mortising

Fairly Easy to Very Easy
Easy to mortise

Moulding

Very Good to Excellent Results
Fairly Easy to Very Easy
Excellent moulding properties

Nailing

Pre-Boring Recommended
Fair to Good Results
Fairly Easy to Very Easy
Satisfactory nailing properties
Pre-boring recommended

Planing

Fair to Good Results
Fairly Easy to Very Easy

Reported to plane well, but cross grain may produce woolly surfaces.

Resistance to Impregnation

Resistant sapwood
Resistant heartwood

Response to preservative treatment if rated as fair to poor.

Response to Hand Tools

Responds Readily
Easy to Work
Works well with hand tools

Routing & Recessing

Fairly Easy to Very Easy
Fair to Good Results
Routing is easy
Good in both routing and recessing.

Sanding

Fairly Difficult to Very Difficult

The wood is fairly difficult to sand due to its resin content.

Screwing

Fair to Good Results
Very Good to Excellent Results
Fairly Easy to Very Easy
Good screwing properties
Good screw holding properties

Turning

Fairly Difficult to Very Difficult
Interlocked or cross grain
Difficult to turn

Painting

Fair to Good Results
Fairly Easy to Very Easy
Little or no surface prep required

Polishing

Fair to Good Results
Good results

Staining

Fair to Good Results
Very Good to Excellent Results
Stains well

Strength Properties

Resists denting and marring
Hardness = medium
Density = high
Compression strength (parallel to grain) = medium
Bending strength (MOR) = high

Numerical Data

Item Green Dry English
Bending Strength 7360 12328 psi
Density 32 lbs/ft3
Hardness 769 lbs
Maximum Crushing Strength 3295 5920 psi
Shearing Strength 2136 psi
Stiffness 1413 1830 1000 psi
Specific Gravity 0.37
Weight 31 25. lbs/ft3
Radial Shrinkage 3 %
Tangential Shrinkage 5 %
Item Green Dry Metric
Bending Strength 517 866 kg/cm2
Density 512 kg/m3
Hardness 348 kg
Maximum Crushing Strength 231 416 kg/cm2
Shearing Strength 150 kg/cm2
Stiffness 99 128 1000 kg/cm2
Specific Gravity 0.37
Weight 496 400. kg/m3
Radial Shrinkage 3 %

References
Boone, R.S., C.J. Kozlik, P.J. Bois, E.M. Wengert. 1988. Dry Kiln Schedules for Commercial Hardwoods -Temperate and Tropical. USDA, Forest Service, General Technical Report FPL-GTR-57, Forest Products Laboratory, Madison, Wisconsin.

Chudnoff, M.,1984,Tropical Timbers of the World,U.S.A. Department of Agriculture, Forest Service, Forest Products,Laboratory, Madison.

Keating, W.G., Bolza, E.,1982,Characteristics properties and uses of timbers. South East Asia, Northern,Australia and the Pacific,C.S.I.R.O. Div. Chemical Technology,Inkata Press,1

WCMC. 1992. Conservation Status Listing – Trees and Timbers of the World. World Conservation Monitoring Center-Plants Programme, Cambridge, CB3 ODL, United Kingdom